10 % w/v TCA/ acetone/ 0.07 % v/v -Mercaptoethanol
Plant cells are rich in compounds that interfere with the 2DE separation method such as salts, organic acids, phenolics, pigments, terpenes, among others. A common protocol used in our lab for extraction proteins from plant tissues consists in the homogenization of mortar-grounded material in liquid nitrogen with an extraction buffer (20 mM Tris-HCl, pH 8.0, 5 mM EDTA, 50 M leupeptin, 1 M pepstatin A, 10 M 3, 4-dichloroisocumarine, 1 mM phenylmethylsulfonyl fluoride and 0.05 % SDS). Although, proteins extracted following this protocol produce good SDS-PAGE separations they are not suitable for 2DE. Therefore, we adopted the widly applied (see references) protocol developed by Damerval and introduced some modifications. We were able to generate 2DE separations with superior resolution and recovery from various plant parts. Moreover, we tested this method to prepare and separte proteins from mycelium of the filamentous fungus Aspergillus nidulans with great success.
Protocol
- Ground tissue in a mortar with liquid nitrogen. Collect grounded material in a eppendorff tube (tube weight 1.0 g).
- Weight the material
- Add 10 % w/v trichloroacetic acid and 0.07 % v/v 2-mercaptoethanol in COLD (-20 C) acetone (approx. 1ml for 0.3 g of tissue
- Incubate for 2 hs at -20C (Other protocols leave it over night at -20 C)
- Centrifuge the precipitated proteins in microfuge for 15-20 min. at 14,000 rpm
- Wash pellet with COLD acetone containing 0.07 % v/v 2-mercaptoethanol
- (approx. 1 ml) to remove pigments and lipids until the pellet is colorless.
- Dry proteins under vacuum (5- 10 min.)
- Resuspend proteins in the appropriate rehydration buffer
- Sonicate to extract proteins in a water-bath sonicator, 15-30 min.
- Centrifuge and collect the supernatant containing predominantly soluble
proteins.
For a liquid sample (such a plasma, lysides or a grounded tissue
resuspended in a buffer) add 4 vol. of the 10 % w/v trichloroacetic acid
and 0.07 % v/v 2-mercaptoethanol in acetone and start at step 4.
