Reagents:
Lysis buffer
25 mM Tris-HCl, pH 7.4
5 mM EDTA
1 mM ATP
20 µg/ml CLAP
1 mM PMSF
Buffer A
10 mM MgCl2
0.2 M Tris-HCl, pH 7.4
0.2 % Triton X-100
Buffer B
0.2 M sodium acetate, pH 5.0
0.2 % Triton X-100
Buffer C
0.2 M Tris-HCl, pH 7.4
0.2 % Triton X-100
Isolating cellular enzyme
1) Grow 5 x 108 cells under regular growth conditions.
2) Pellet cells and wash one time with ice cold PBS.
3) Resuspend pellet in 10 ml of ice cold lysis buffer.
4) Bomb cells: 20 minutes @ 350 psi, 4°C
5) Spin lysed cell mixture at 2,100 rpm, 4°C for 10 minute.
6) Discard pellet and set aside 3 ml of supernatant.
--> Supernatant from this step = "homogenate"
7) Spin remaining supernatant (" 7 ml) @ 200,000 xg,4 °C for 30 minutes.
centrifuge ____________________
rotor ____________________
rpm ____________________
time @ plateau ____________________
8) Recover both supernatant and pellet separately.
--> Supernatant = "cytosol"
9) Resuspend pellet in 3 ml lysis buffer.
--> This fraction = "membrane"
Preparing substrate
10) Resuspend dried 14C-SM in appropriate buffer to get 20 nmoles, 2 x 105 cpm, 100 µl per sample.
Buffer A: For neutral, Mg-dependent enzyme.
Buffer B: For acidic enzyme.
Buffer C: For neutral, Mg-independent enzyme.
11) Vortex vigorously and sonicate if neccessary.
--> Make sure lipid is fully solubilized!!
Assaying enzyme activity
12) Mix cellular enzyme with inducer gently.
--> The volume of this mix should be 100 µl.
13) Pre-incubate for 10 minutes at 37 °C.
14) Add 100 µl 14C-SM mix to each sample and mix gently.
15) Incubate reaction for 15 minutes.
16) Stop reactions by adding 1.5 ml of chloroform:methanol, 1:2.
17) Vortex, add 0.2 ml of water and vortex.
18) Add 0.5 ml chloroform and vortex to break phases.
19) Add 0.5 ml water and vortex.
20) Spin samples at 3,000 rpm for 5 minutes.
21) Count 950 µl of the upper phase and 0.5 ml of the lower phase.
--> The total volume of upper, aqueous phase should equal 1.9 ml and the total volume of the lower, chloroform phase should equal 1 ml.
体外鞘磷脂分析
2010-05-26 22:56:27 来源:不详 评论:0 点击:
Reagents:Lysis buffer25 mM Tris-HCl, pH 7.45 mM EDTA1 mM ATP20 µg/ml CLAP1 mM PMSFBuffer A10 mM MgCl20.2 M Tris-H
上一篇:胶体金标记蛋白A技术
下一篇:Liposome Preparation
分享到:
收藏
评论排行
- ·中国发酵企业数据库(4)
- ·(4)
- ·CoQ10高产菌株选育的研究进展(2)
- ·抗生素发酵工艺所用冷却塔的性能分析及处理(1)
- ·微生物菌种选育技术.rar(1)
- ·发酵生产染菌及其防治(1)
- ·赤藓糖醇发酵工艺研究(1)
- ·重组AiiA 蛋白可溶性表达及发酵条件优化(1)
- ·生物反应器设计软件_发酵罐绿色版(1)
- ·酵母粉、酵母浸粉的区别(1)
- ·雷帕霉素研究进展(1)
- ·透明质酸用途和行业概况(1)
- ·黄酒制作工艺(1)
- ·水解(酸化)工艺与厌氧发酵的区别(1)
- ·糖蜜酒精废液处理过程中产生的微生物蛋...(1)
- ·紫杉醇高产菌发酵产物的分离、纯化和鉴定(1)